Skip to product information
Cream light filtering cellular shades lowered over two home office windows

Cellular Shades - Light Filtering

Color
Cell Size
Request a Quote

Made to measure. Price depends on your window size, so we quote each order individually. Send us your measurements and we'll reply with a price — a person checks every set of measurements before anything is cut. Lead time is 2–3 weeks from approval.

Prefer email? Write to orders@ordermyblinds.com or call 833-3BLINDS.

Cellular shades — also called honeycomb shades — are built from pleated cells that trap a layer of air against the glass. That pocket of air is what slows heat moving through the window, holding warmth in through winter and out through summer, and it makes these the most insulating option we carry.

The light-filtering fabric softens daylight and gives daytime privacy while keeping the room bright, rather than shutting the window down entirely. Cell size is selectable: a smaller cell reads as a finer, more detailed pleat, while a larger cell gives a deeper insulating pocket and a more relaxed line.

Made to measure to your exact window dimensions. Send us your window sizes and we’ll come back with a quote, usually the same day. Lead time is 2–3 weeks from order confirmation, shipped direct to your door.

Specifications

Type
Cellular (honeycomb)
Cell construction
Single cell
Light control
Light filtering
Cell size
3/4 inch or 9/16 inch
Shade backs
Neutral white on every color, so the house looks uniform from outside
Colors
8 listed here; the single cell light filtering range runs to 28 — ask if you want one that is not listed
Fire-retardant fabric
Available in 9/16 inch, including Cotton and Winter White
Mount
Inside (IM) or outside (OM)
Lead time
2–3 weeks

Measuring your window

Measure the width first, then the height, in inches. Take the width at three points across the opening and use the smallest — window openings are rarely perfectly square. Rough numbers are fine for a quote; we confirm exact sizes with you before anything is cut.

Inside mount (IM) sits inside the window opening for a clean, recessed look. Measure the opening itself and send those numbers as they are — don’t subtract anything for clearance, we apply the factory deduction.

Outside mount (OM) fixes to the wall or trim outside the opening and covers more than the glass. It is the better choice where an opening is out of square, or too shallow to hold a blind. Tell us the area you want covered and we confirm the overlap with you.

Need more detail? Follow our step-by-step measuring guide.

Send the raw opening size. The factory takes the bracket deduction for an inside mount — if you subtract it as well, the finished shade comes out too narrow.
Inside mount: measure the width at the top, middle and bottom of the opening and send us the smallest of the three. Openings are rarely square.
Measure the height at the left, centre and right and send us the longest, so the shade covers the whole opening.
Measure the depth of the opening too. The headrail needs a flat run of depth to sit in — send us the number and we will confirm it clears before anything is cut.
A raised cellular shade gathers into a small stack at the top of the opening, much shallower than the slat stack on a wood or faux wood blind, so an inside mount usually still leaves most of the glass clear.
Outside mount: you need flat wall or trim above and to each side of the opening for the brackets to land on. Check there is nothing in the way.
Measure every window separately, even ones that look identical. Openings in the same room are routinely out by a quarter inch or more.
Rough numbers are fine for the quote. The final order wants the nearest 1/8 inch.

You may also like